无论什么设备使用一段时间，都必须进行养护。养护工作的质量会影响设备的寿命和生产效率。自动搅拌车也不例外，下面小编就简单介绍一下自动搅拌车的相关养护方法。

No matter what equipment is used for a period of time, it must be cured. The quality of maintenance work will affect the service life and production efficiency of equipment. Automatic mixer truck is no exception. The following small series will briefly introduce the relevant maintenance methods of automatic mixer truck.

检查各润滑点的润滑油是否充足，以保证气路系统中的润滑器保持充足的油量；

Check whether the lubricating oil at each lubricating point is sufficient to ensure that the lubricator in the air circuit system maintains sufficient oil;

检查电机电器是否过热，有无噪音，检查仪表指示是否正常，信号系统是否良好；

Check whether the motor and electric appliance are overheated and noisy, whether the instrument indication is normal and whether the signal system is in good condition;

保持周围环境整洁；

Keep the surrounding environment clean and tidy;

定期检查调整气缸电磁阀蝶阀的启闭是否符合要求；

Regularly check and adjust whether the opening and closing of the cylinder solenoid valve butterfly valve meet the requirements;

检查自动搅拌车各系统是否有漏气漏油漏电漏灰等现象。如出现此类现象，需及时处理；

Check whether each system of the automatic mixer has air leakage, oil leakage, electric leakage, ash leakage, etc. In case of such phenomenon, it shall be handled in time;

在使用过程中，自动搅拌车的搅拌机和出料斗应每4小时清洗一次，以免残留固结，影响设备的正常使用；

During use, the mixer and discharge hopper of the automatic mixer shall be cleaned every 4 hours to avoid residual consolidation and affect the normal use of the equipment;

每次运行后，将过滤器储气罐空压机内的水排掉，对运行中的故障一一排除。

After each operation, drain the water in the air compressor of the filter air storage tank and eliminate the faults one by one.

自动搅拌车使用后，必须立即清除搅拌机和加料机内的残留物料，使传感设备归零；

After the automatic mixer is used, the residual materials in the mixer and feeder must be removed immediately to make the sensing equipment return to zero;

设备运行一段时间后，需要检查各个润滑点，看是否需要添加；

After the equipment operates for a period of time, it is necessary to check each lubrication point to see whether it needs to be added;

定期空转设备，检查电机减速电机等部件是否有过热异响等现象；

Regularly idle the equipment, and check whether the motor reducer motor and other components have overheating, abnormal noise and other phenomena;

完成生产工作后，需要对周围环境进行清理；

After the completion of production, the surrounding environment needs to be cleaned;

不定期检查各系统，检查是否有漏灰漏气漏油等现象，必要时立即处理；

Inspect each system irregularly to check whether there is ash leakage, air leakage, oil leakage and other phenomena, and deal with them immediately if necessary;

在自动搅拌车的卸料口，应经常清理残留物，以免妨碍设备的正常运行；

At the discharge port of the automatic mixer, the residues shall be cleaned frequently to avoid hindering the normal operation of the equipment;

每项工作完成后，需对空压机储气罐过滤器内部的水进行清洗，排除运行中的故障；

After the completion of each work, the water inside the filter of the air compressor air storage tank shall be cleaned to eliminate the faults during operation;

按规范定期对设备中的搅拌器气动蝶阀装置空气过滤器等装置进行维护保养；

Regularly maintain the agitator, pneumatic butterfly valve, air filter and other devices in the equipment according to the specifications;

每次气动操作前，设备应空转，检查搅拌筒或搅拌叶片的转动方向，各工作装置的运转及制动情况，确认正常后再投料生产；

Before each pneumatic operation, the equipment shall be idled. Check the rotation direction of the mixing drum or mixing blade, the operation and braking of each working device, and put into production after confirming that it is normal;

严格执行上述检查项目，保证自动搅拌车设备运行效率和操作人员安全。

Strictly implement the above inspection items to ensure the operation efficiency of automatic mixer truck equipment and the safety of operators.

以上就是问题解答的相关内容了，希望能够帮助到大家，如对这一问题还存在任何疑问，都欢迎关注我们网站http://www.sdzkjf.cn并咨询我们的工作人员，将竭诚为您服务。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://www.sdzkjf.cn And consult our staff, will serve you wholeheartedly.