1、 The tank has small inclination angle, low center of gravity and stable driving and rotation

罐体采用德国施维英工艺，根据不同底盘做特殊优化，采用专用工装，保证了罐体倾斜角度小，更低，不易侧翻。减少焊接面积，大大增加了搅拌罐的强度。钢材采用先进的等离子切割技术，保证生产效率的同时，减小因热力而使钢材产生形变的误差。

The tank body adopts German schweining process, and is specially optimized according to different chassis. Special tooling is adopted to ensure that the tank body has small inclination angle, lower center of gravity and is not easy to roll over. The welding area is reduced and the strength of the mixing tank is greatly increased. The steel adopts advanced plasma cutting technology to ensure the production efficiency and reduce the deformation error of steel due to heat.

二、搅拌、进出料性能优越

2、 Excellent mixing, feeding and discharging performance

封头、筒体、叶片均采用Q345合金钢制作，耐磨和抗屈服强度好，使用寿命长。叶片采用双对数，阿基米德螺旋线，搅拌性能优越，进料速度大于2.7立方每分钟，出料速度大于1.8立方每分钟，残余率低。

The head, cylinder and blade are made of Q345 alloy steel, with good wear resistance and yield strength and long service life. The blade adopts double logarithm, Archimedes helix, excellent mixing performance, feeding speed greater than 2.7 cubic per minute, discharging speed greater than 1.8 cubic per minute, low residual rate.

三、副车架抗扭能力强

3、 The subframe has strong torsion resistance

副车架的纵、横梁采用16Mn材质的矩形管制作，一体成型，无拼焊，关键受力部位应用斜拉结构，使车架具有较强的抗扭转，抗撕裂能力。副车架与底盘连接结构可靠，减轻上装部分的扭转对底盘的影响，从结构上延长了底盘的使用寿命。

The longitudinal and cross beams of the subframe are made of 16Mn rectangular tubes, which are formed in one piece without welding. The key stressed parts are of cable-stayed structure, so that the frame has strong torsion resistance and tear resistance. The connection structure between the subframe and the chassis is reliable, which reduces the impact of the torsion of the upper part on the chassis and extends the service life of the chassis.

四、进出料系统

4、 Feeding and discharging system

进料斗空间大，设计角度合理，是进料速度加快，不易发生堵料和溢出现象；溜槽能进行180度旋转，带限位装置，上下左右均可调整，其上设有锁止装置，在车辆行驶过程中将其固定锁紧，以确保行驶安全可靠。

The feeding hopper has large space and reasonable design angle, so the feeding speed is accelerated, and it is not easy to block and overflow. The chute can rotate 180 degrees, with a limiting device, which can be adjusted up, down, left and right. It is equipped with a locking device, which can be fixed and locked in the process of vehicle driving to ensure safe and reliable driving.

五、液压系统

5、 Hydraulic system

液压传动系统采用流体动力领域的全球知名品牌：ZF、PMP、Bonfiglioli、Rexroth、Eaton、Danfoss等，让高品质的可靠性得以传承。

The hydraulic transmission system adopts the world famous brands in the field of fluid power: ZF, PMP, Bonfiglioli, Rexroth, Eaton, Danfoss, etc., so as to inherit the high-quality reliability.

六、操纵系统

6、 Control system

操纵系统采用定位准确、控制可靠的杆式控制系统，控制点在驾驶室内、车尾两侧共三处。控制系统结构紧凑、操作灵活、控制可靠。

The control system adopts the rod control system with accurate positioning and reliable control. The control points are in the cab and on both sides of the rear of the car. The control system has compact structure, flexible operation and reliable control.