The owners of Zhongke Jufeng concrete mixer should cultivate the understanding of automatic inspection, protection and maintenance, learn some background knowledge of protection and maintenance of vehicles, truly browse vehicles alone, and remember some data, etc. Superstitious car maintenance can ensure the coagulation, superb technology and driving safety of the mixer.

　　经常检查传动油位是否有异常。突袭的方式积极传动油和主动性机油的不同类型的纠纷,倡议在寒冷条件下机油突袭,水泥自动搅拌车传动油是需要预热油50 C左右,变速杆在每一块再次停顿2秒后停车,当油脚畸形的油位应位于和之间的线,如果不是几个,应该增加相同的风致实时油。

　　Always check whether the transmission oil level is abnormal. The way of sudden attack is to actively drive different types of disputes between oil and active oil. It is suggested that the oil should be raided in cold conditions. The drive oil of concrete mixer needs to be preheated about 50c, and the gear lever stops after each block stops again for 2 seconds. When the oil level of oil foot deformity is between the highest and lowest line, if not several, the same wind-induced real-time oil should be added.

　　许多鼓动家的主人，刚买了一辆新车就躲了起来。但一旦过了保修期，关于如何对搅拌器进行混凝检查、保养、培训维修，懒得说清楚:“车可以开着开着，不能动就去修理。”

　　The owners of many agitators hid as soon as they bought a new car. But once the warranty period has passed, I don't want to say clearly about how to carry out coagulation inspection, maintenance, training and repair for the agitator: "the car can be driven, and can't be moved to repair."当发生混乱时要送混凝器进行维修，由于没有实时的维修保养，导致小故障的主动传播扩大，导致小事故的改进和发生。

　　In case of chaos, it is necessary to send the condenser for maintenance. Due to the lack of real-time maintenance, the active propagation of small faults will expand, leading to the improvement and occurrence of small accidents.

　　第二，控制主动传动油循环的变化。主动齿轮箱外部控制机制是非常深奥的,常见的差距很小,所以大多数制造商发起主动齿轮箱换油周期通常是两年或4600万m .异常垄断过程中,混合汽车变速箱油一般的凝固温度变化约120摄氏度,所以石油的高风,也必须面对F净。其次，齿轮箱油垄断很长一段时间后，油的出现，可能会有泥浆的成分，会增加各部分的摩擦和磨损，也会影响系统的油压，使能量传递受到影响。第三，脏油在泥浆中会使阀体在阀体内的运动不平稳，油压控制受到影响，使主动传动显示异常。

　　Second, control the change of active transmission oil circulation. The external control mechanism of the driving gearbox is very profound, and the common gap is very small, so the oil change cycle of the driving gearbox initiated by most manufacturers is usually two years or 46 million M. in the abnormal monopoly process, the solidification temperature of the hybrid vehicle gearbox oil generally changes about 120 ℃, so the high wind of oil must also face the f net. Secondly, after the monopoly of gearbox oil for a long time, the appearance of oil may have the composition of mud, increase the friction and wear of each part, also affect the oil pressure of the system, and affect the energy transmission. Third, dirty oil in the mud will make the movement of the valve body in the valve body unstable, and the oil pressure control will be affected, so that the active transmission display is abnormal.

　　三、准确换传动油。目前,更好的是静态的换油换油方法,采用公共变速箱清洗和灌溉设备,自上料水泥搅拌车齿轮箱操作的过程中,旧的油全循环,F放电后的净增加新的变速箱油的换油率超过90,保证巧妙的换油的结果。

　　3、 Change the transmission oil accurately. At present, it is better to adopt static oil change method. In the process of using public gearbox cleaning and irrigation equipment and concrete mixer gearbox operation, the old oil is fully circulated, and the net increase of new gearbox oil after f discharge is more than 90 to ensure the ingenious oil change result.

　　以上是水泥自动搅拌车厂家小编为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.sdzkjf.cnThe above is the relevant content introduced by the manufacturer of Zhongke Jufeng concrete mixer. For more information, please visit the website: http://www.sdzkjf.cn