每年的案例太多，几乎每年新闻都会报道，水泥自动搅拌车停在路边或者停在斜坡时，搅拌车自动行驶撞上路边行人或者车辆，那么，在无人驾驶搅拌车的时候，要如何正确操作呢？
Every year there are so many cases, almost every year the news will report, cement automatic mixer parked on the side of the road or parked in a ramp, the mixer automatically hit the side of the road pedestrians or vehicles, then, indriverless mixer, how to operate correctly?
施工的情况下，要先检查车况，包括转向，灯光，信号，制动，查看搅拌车轮以及溜槽有没有损坏，包括搅拌叶片，是检查刹车，底盘，以及螺丝有没有松动等。
In case of construction, check the vehicle condition, including steering, lighting, signal, braking, check mixing wheels and chute for damage, including mixing blades, and finally check brakes, chassis, and screws are loose.

在施工的时候要了解路况以及现场情况，选择平坦的路面，停车时要注意停在平路，斜坡时要先刹车，行驶过程中要注意交通信号灯，以及路边设置的交通规则，时速不超过15km。
In the construction of the road and the site to understand the situation, choose a flat road, parking should pay attention to the flat road, braking slope, driving process should pay attention to traffic lights, as well as roadside traffic rules, speed is not more than 15 km.
水泥自动搅拌车在搅拌以及卸料的过程中，要观察周围人员以及配合周围人员的指挥，如果发现情况要立即停车并检查。
Cement automatic mixer in the mixing and unloading process, to observe the surrounding personnel and to cooperate with the surrounding personnel command, if the situation to stop and check immediately.
注意不要在高压线下施工，远离高压场所等，详情请关注http://www.sdzkjf.cn/。
Be careful not to work under high-voltage lines, away from high-voltage places，Please pay attention to details

上一篇：混凝土搅拌一车轻松搞定！
下一篇：一辆水泥自动搅拌车开了7年，要知道的小知识