自动搅拌车的正确操作方法可以归纳为：一轻、二稳、三离、四勤、五协调、六严禁。下面小编就来为您详细讲讲其中的内容点吧。

The correct operation methods of the automatic mixer can be summarized as follows: one light, two stable, three separated, four diligent, five coordinated and six forbidden. Let's talk about the content points in detail.

一轻：

One light:

在自动搅拌车作业时脚跟紧抵驾驶室地板，脚板和油门踏板保持平行，轻缓地下压加油踏板。

During the operation of the automatic mixer truck, the heel is firmly against the cab floor, the foot plate is parallel to the accelerator pedal, and the refueling pedal is gently pressed.

二稳：

Bistable:

自动搅拌车在作业中，油门始终要稳住。一般作业状态下，油门开度在70%左右为宜。

During the operation of the automatic mixer, the accelerator should always be stable. In general operation state, the throttle opening should be about 70%.

三离：

Three Departures:

在自动搅拌车作业时，脚板应和制动踏板分离开，平放到驾驶室地板上，决不能踩在制动踏板上。自动搅拌车常常在凹凸不平的工地作业，如果脚总是踩在制动踏板上，机身上下窜动会造成驾驶员不轻意地踩制动踏板。一般情况下，要用控制油门减速的办法控制机况和换挡。这样既避免了频繁制动造成制动系统过热，又为自动搅拌车快捷的提速带来方便。

During the operation of the automatic mixer, the foot plate shall be separated from the brake pedal, and placed flat on the cab floor. Never step on the brake pedal. The automatic mixer often works on uneven construction sites. If the foot always steps on the brake pedal, the body will move up and down, causing the driver to step on the brake pedal carelessly. In general, the engine condition and gear shifting shall be controlled by controlling the throttle deceleration. This not only avoids overheating of the braking system caused by frequent braking, but also brings convenience for fast speed increase of the automatic mixer.

四勤：

Four attendance:

在自动搅拌车作业时，特别是在铲挖作业时，应在油门稳定情况下，用循环扳动起升和转斗操纵杆的方法使铲斗铲满物料。起升和转斗操纵杠的循环扳动就是所说的“勤”。这个过程非常重要，对耗油量的影响很大。

During the operation of the automatic mixer, especially during the shoveling operation, the bucket shall be filled with materials by cyclically pulling the lifting and bucket turning control levers under the condition that the accelerator is stable. The cyclic pulling of the lifting and turning lever is called "diligence". This process is very important and has a great impact on fuel consumption.

五协调：

V. Coordination:

协调就是起升和转斗操纵杠有机的配合。自动搅拌车一般的铲挖过程是将铲斗平放在地面，平稳地驶向料堆。在铲斗平行铲往料堆遇阻力时，应遵循先起臂后收斗的原则。这样可以有效地避免铲斗底部受到阻力，从而能够充分发挥大的掘起力。

Coordination is the organic cooperation between the lifting and bucket control rods. The general shovel digging process of automatic mixer truck is to place the bucket flat on the ground and drive steadily to the material pile. When the bucket is parallel to the material pile and encounters resistance, the principle of lifting the boom first and then retracting the bucket shall be followed. This can effectively prevent the bucket bottom from being subjected to resistance, so as to give full play to the large digging force.

六严禁：

VI. Prohibitions:

是严禁轮胎打滑。其次是严禁后轮翘起。三是严禁撞击料堆。

First of all, it is forbidden to slip the tires. Secondly, it is forbidden to tilt the rear wheel. Third, it is strictly prohibited to impact the material pile.

以上内容就是所说的自动搅拌车的正确操作方法的“六步归纳”！希望给你好的帮助，更多事项就来我们网站http://www.sdzkjf.cn进行咨询吧！

The above content is the "six step summary" of the correct operation method of the automatic mixer truck! I hope to give you some help. Please come to our website for more information http://www.sdzkjf.cn Consult!