自上料水泥搅拌车门窗以及焊缝处其实都会粘贴封胶条,这也是为了确保密封性所采取的操作,不然这些缝隙处就会容易被外面的风沙所塞满,从而引起腐蚀等一系列不良现象。今天小编要在这里跟大家分享一下自上料水泥搅拌车密封胶条的四点维护。
In fact, the doors and windows of the self feeding cement mixer truck and the welds will be pasted with sealing strips, which is also the operation to ensure the sealing, otherwise these gaps will be easily filled by the wind sand outside, causing a series of adverse phenomena such as corrosion. Today, Xiaobian would like to share with you four points of maintenance for the sealant strip of self feeding cement mixer truck.
1、检查自上料水泥搅拌车密封条有无大的裂纹,有无断裂。如果密封条断裂了,可以使用粘结剂进行修补。特别是使用密封条专用粘结剂,很容易就能把大的裂纹条补好。当然,如果密封条损伤严重,或老化程度较大,好还是更换新密封条省事。
1. Check whether the sealing strip of self feeding cement mixer has large cracks and cracks. If the sealing strip breaks, it can be repaired with adhesive. In particular, the use of special adhesive for sealing strips can easily repair large cracks. Of course, if the sealing strip is seriously damaged or aged, it is better to replace it with a new one.
2、司机在使用自上料水泥搅拌车洗涤剂进行清洗门窗密封胶条之后,好涂覆一层高渗透性的保护剂,这样既能防止密封条老化又能很大地提高密封条的密封性。除此之外,密封条的缝隙之间很容易塞满沙尘,从而引发锈蚀。为此,应该用刷子把沙尘等干净。
2. After the driver uses the self feeding cement mixer to clean the door and window sealing strips, he should apply a layer of high permeability protective agent, which can not only prevent the sealing strips from aging, but also greatly improve the sealing performance of the sealing strips. In addition, the gaps between the sealing strips are easily filled with sand and dust, thus causing corrosion. Therefore, the sand and dust should be removed with a brush.
3、在更换整个车身时,应在焊缝的搭接部分涂一层密封胶,胶层厚度应约为1mm,并且胶层不得有虚粘、气泡等缺陷。在整个地板下表面和前轮罩下表面应涂3mm-4mm的弹性涂层及防腐涂层。这些措施不仅可以大大增强整车的密封性和减慢车身的锈蚀速度,而且还可以大大提高乘坐舒适性。
3. When replacing the whole body, a layer of sealant shall be applied to the overlapping part of the weld seam. The thickness of the adhesive layer shall be about 1mm, and the adhesive layer shall be free of defects such as virtual adhesion and bubbles. The whole lower surface of the floor and the lower surface of the front wheel housing shall be coated with 3mm-4mm elastic coating and anti-corrosion coating. These measures can not only greatly enhance the tightness of the whole vehicle and slow down the corrosion rate of the body, but also greatly improve the ride comfort.
4、车门与车身的密封是一个比较困难的部位,密封要求比较严,应密封的部分比较长,各密封部位的断面形状不尽相同,而且车门启闭频繁。在自上料水泥搅拌车上常设置3道,4道密封,安装前支柱及车顶侧横梁部位的四重密封的构造。这种多道密封一般都布置在前门缝里,除具有密封功能外,还有汽车隔音降噪的作用。
4. The sealing of the door and the body is a difficult part. The sealing requirements are strict. The part that should be sealed is long. The section shape of each sealing part is different, and the door opens and closes frequently. Three and four seals are usually set on the self loading cement mixer, and the structure of four seals at the front pillar and roof side beam is installed. This multi-channel seal is generally arranged in the front door seam. In addition to the sealing function, it also has the function of sound insulation and noise reduction.
密封胶条能保证开关车门沉稳厚重,还能使车内避风雨、防尘、隔热、隔音,对门窗交接的边缘起到装饰的效果。当车身受到振动与扭曲时,密封条还起到缓冲、吸震、保护玻璃的作用。因此,自上料水泥搅拌车保养无小事,任何一个环节都不容忽视。更多相关事项就来我们网站
http://www.sdzkjf.cn咨询吧!
The sealing tape can ensure that the door is stable and thick when opening and closing, and can also make the car weather proof, dust proof, heat insulation and sound insulation, and play a decorative role on the edges of the door and window joints. When the body is subject to vibration and distortion, the sealing strip also plays the role of buffering, shock absorption and protecting the glass. Therefore, there is no trivial matter in the maintenance of self loading cement mixer, and no link can be ignored. Come to our website for more information http://www.sdzkjf.cn Consult!
上一篇:买搅拌车时应该看哪些方面
下一篇:搅拌车的空气滤清器什么时候更换