制动盘是盘式制动器的摩擦偶件，除应具有作为构件所需要的强度和刚度外，还应有尽可能高而稳定的摩擦系数，以及适当的耐磨性、耐热性、散热性和热容量等。下面来讲讲制动盘容易出现的问题有什么。

The brake disc is the friction coupling part of the disc brake. In addition to the strength and stiffness required as a component, it should also have a high and stable friction coefficient as much as possible, as well as appropriate wear resistance, heat resistance, heat dissipation and heat capacity. Now let's talk about the problems that are easy to occur with the brake disc.

自动搅拌车的制动摩擦片部位受损，就会使金属衬片因受到摩擦而出现收回尖叫声并且会伴随着过热现象，这时我们就应该更换制动摩擦片了。

If the brake friction lining of the automatic mixer is damaged, the metal lining will retract and squeal due to friction, accompanied by overheating. At this time, we should replace the brake friction lining.

制动钳部位有一个起固定作用的螺栓，该螺旋出现松动后就会导致制动钳部位出现歪斜的现象，这时零件和制动盘就互相干预，这样也会导致出现异响。

There is a bolt for fixing the brake caliper. If the screw is loose, the brake caliper will be skewed. At this time, the parts and the brake disc will interfere with each other, which will also cause abnormal noise.

低压胶管部位出现了老化、磨损的现象，油管接头处有所松动或该部位的密封件出现了损坏等，以上情况都是造成制动液外渗漏的原因，这时我们需要对其相关部位进行检查，把接头上紧或者更换橡胶管、密封件等部位。

The aging and abrasion of the low-pressure rubber pipe, the looseness of the oil pipe joint or the damage of the sealing element at this part are all the reasons for the leakage of the brake fluid. At this time, we need to check the relevant parts, tighten the joint or replace the rubber pipe, sealing element and other parts.

制动钳的活塞处有一个密封圈，若该密封圈出现了磨损的情况，就会导致制动液外漏，这时我们需要更换该密封圈和防尘圈。

There is a seal ring at the piston of the brake caliper. If the seal ring is worn, the brake fluid will leak out. At this time, we need to replace the seal ring and dust ring.

以上是自动搅拌车制动盘容易出现的问题，您在了解相关问题内容之后就要做好预防准备工作，更多注意就来我们网站http://www.sdzkjf.cn咨询吧！

The above are the problems that are easy to occur with the brake disc of the automatic mixer. After you understand the relevant problems, you should make preparations for prevention. Please come to our website for more attention http://www.sdzkjf.cn Consult!