. check whether there are large cracks or cracks in the sealing part of the feeding mixing integrated system. If the seal breaks, it can be repaired with adhesive. In particular, sealing with a special adhesive can easily fill large cracks. Of course, if the seal is seriously damaged or damaged, replace it with a new one.

2.用混凝土搅拌清洁剂清洁门窗密封条后，驱动程序应涂一层防渗透保护剂，以防止密封条老化，并大大提高密封条的密封性能。此外，挡风雨条之间的缝隙很容易充满灰尘和铁锈。为此，请使用刷子灰尘。

2. After cleaning the sealing strip of doors and windows with concrete mixing cleaner, the driver shall apply a layer of anti-seepage protection agent to prevent the aging of the sealing strip and greatly improve the sealing performance of the sealing strip. In addition, the gap between the weatherstripping is easy to be filled with dust and rust. To do this, use a brush to remove the dust.

3.更换整个车身时，必须在焊缝上涂一层密封剂。粘合剂层的厚度应为约1mm，并且粘合剂层应无缺陷，例如假粘性和气泡。地板的整个底面和前轮盖的底面必须涂上3mm-4mm的弹性体涂层和防腐涂层。这些措施不仅大大提高了车辆的密封性能，而且不仅减缓了车身的生锈，而且大大提高了乘坐舒适性。

3. When replacing the whole body, a layer of sealant must be applied to the weld. The thickness of the adhesive layer shall be approximately 1 mm and the adhesive layer shall be free from defects such as false adhesion and air bubbles. The whole bottom surface of the floor and the bottom surface of the front wheel cover must be coated with 3mm-4mm elastomer coating and anti-corrosion coating. These measures not only greatly improve the sealing performance of the vehicle, but also slow down the body rust, and greatly improve the ride comfort.

4.密封门和门是一个相对困难的部分。密封要求相对严格。密封部分相对长，每个密封部分的横截面形状不同，并且门经常被打开和关闭。该上料搅拌一体机装有三向四向密封件，四个密封结构，前支柱和顶梁侧梁。这种多通道密封通常放置在前门的接缝处，除了具有密封功能外，还具有减少汽车噪音的作用。

4. Sealing doors and doors is a relatively difficult part. The sealing requirements are relatively strict. The sealing part is relatively long, the cross section shape of each sealing part is different, and the door is often opened and closed. The feeding and mixing machine is equipped with three-way and four-way seals, four sealing structures, front strut and side beam of roof beam. This multi-channel seal is usually placed at the joint of the front door. In addition to the sealing function, it can also reduce the noise of the car.

5.窗户玻璃破裂后，驾驶员在更换玻璃时需要检查密封条是否破裂。由于窗户通常在维修后无法恢复到其原始形状，因此除了使窗户玻璃易于拉动和提起外，还必须注意窗户玻璃周围的密封条。如果玻璃和玻璃罐之间的间隙不均匀，则橡胶条与玻璃罐的接触不良，驾驶员可以轻松用手拉动密封圈。

5. After the window glass breaks, the driver needs to check whether the sealing strip breaks when replacing the glass. Since the window cannot be restored to its original shape after maintenance, in addition to making the window glass easy to pull and lift, attention must also be paid to the sealing strip around the window glass. If the gap between the glass and the glass tank is uneven, the rubber strip has poor contact with the glass tank, and the driver can easily pull the sealing ring by hand.

6.更换车顶时，驾驶员必须先在车顶周围涂上一层导电密封胶。焊接后，在流道和接头上涂卷边胶。这不仅对身体有帮助。该密封件可防止由于法兰焊缝中积水而导致的汽车过早腐蚀。

6. When replacing the roof, the driver must first apply a layer of conductive sealant around the roof. After welding, the flow channel and joint shall be coated with curling adhesive. It's not just good for the body. The seal prevents premature corrosion of the vehicle due to water accumulation in the flange weld.

本文的精彩内容由水泥自上料搅拌车提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.sdzkjf.cn我们有专门的客服为您解答问题

The highlights of this article are provided by the knowledge provided by Zhongke from the feeding mixer. There are many highlights in this website. For more details, you can click to enter: http://www.sdzkjf.cn We have special customer service to answer your questions