水泥自动搅拌车在日常使用的过程中，避免不了会出现一些故障，很多的司机不知道怎么处理，尤其是新手司机遇到车辆出故障会有点手足无措，今天分享一些水泥自动搅拌车常见故障的解决办法：

In the process of daily use of cement automatic mixer, some failures can't be avoided. Many drivers don't know how to deal with them. Especially novice drivers will be a little confused when encountering vehicle failures. Today, we share some solutions to common failures of cement automatic mixer:

1.水泥自动搅拌车为什么行驶过程中没劲？

1. Why does the automatic cement mixer truck have no energy during driving?

答：这可能是搅拌车的排气制动打开了，把排气制动关闭就可以了。

Answer: This may be because the exhaust brake of the mixer is turned on. Just turn off the exhaust brake.

2.搅拌车的尿素不燃烧是什么问题？

2. What is the problem that the urea in the mixer does not burn?

答：这一般是因为搅拌车的尿素中有杂质，在燃烧后把排气管过滤网堵塞了，更换或清洗排气管过滤网就可以了。

Answer: This is generally because there are impurities in the urea of the mixing truck, and the exhaust pipe filter screen is blocked after combustion. Replace or clean the exhaust pipe filter screen.

3.搅拌车在拉料的过程中，将车倒上坡，为什么卸不出料来？

3. Why can't the mixer truck unload the material when it reverses the truck to the slope?

答：这是因为搅拌车在倒车上坡的过程中，混凝土会堆积在搅拌罐的封头位置，重在搅拌罐的前面，这时混凝土分布不均，导致减速机转不动，出现不卸料的情况。

Answer: This is because when the mixer is backing up the slope, the concrete will be piled up at the head of the mixing tank, and the weight will be in front of the mixing tank. At this time, the concrete will be unevenly distributed, resulting in the gear reducer will not move and there will be no unloading.

4.新买的搅拌车行驶途中突然熄火是怎么回事？

4. What happened to the sudden flameout of the newly purchased mixing truck during driving?

答：这个情况可能是新搅拌车的油箱进入了空气，因为新买的搅拌车油箱的油一开始不多，在加油的过程中很可能进了空气，只需要多按几下排气阀就行了，还不行的话，就要松动供油嘴的螺帽，把大量气体排出即可，这样做可能会有少量柴油流出，有些小损耗。

A: This may be because the fuel tank of the new mixing truck enters into the air, because the fuel tank of the new mixing truck is not much at the beginning, and it is likely to enter into the air during the refueling process. Just press the exhaust valve a few times. If it is not enough, loosen the nut of the fuel supply nozzle and exhaust a large amount of gas. This may cause a small amount of diesel to flow out, and some small losses.

5.新购买的水泥自动搅拌车在行驶过程中，驾驶室仪表盘上会显示工具“扳手”的图样是怎么回事？

5. When the newly-purchased cement automatic mixer is driving, what is the drawing of the tool "wrench" displayed on the dashboard in the cab?

答：这个情况是告诉我们，搅拌车该保养了。

A: This tells us that the mixer needs to be serviced.

6.搅拌车驾驶室仪表盘上显示“故障灯”亮是怎么回事？

6. What is the reason that the "fault light" on the dashboard in the cab of the mixer is on?

答：当搅拌车出现这种情况也不要担心，这可能是因为您的爱车加的油号与上次加的不一致，还可能是因为加的尿素与上次的不是同一品牌，这些都可能会导致“故障灯”亮的，可以到就近的服务站去进行电脑检测消掉。

Answer: Don't worry when this happens to the mixer. It may be because the fuel number of your car is not the same as that of the last time. It may also be because the urea added is not the same brand as that of the last time. These may cause the "fault light" to light up. You can go to the nearest service station for computer detection and elimination.

7.水泥自动搅拌车的托轮发热是为什么？

7. Why is the supporting wheel of the cement automatic mixer hot?

答：这是因为托轮该打黄油了，检查轨道是否有气泡，轨道是否变形等等。

Answer: This is because it is time to grease the supporting roller. Check whether there are bubbles in the track and whether the track is deformed.

8.搅拌车的散热器发热是怎么回事？

8. What is the heat of the radiator of the mixer?

答：这一般是要换液压油或散热器滤芯。

Answer: This usually involves changing the hydraulic oil or radiator filter element.

水泥自动搅拌车常见故障的解决办法就是以上讲解的了，您对此有怎样的疑惑或者需求就来我们网站http://www.sdzkjf.cn咨询吧！

The solutions to common failures of automatic cement mixer are explained above. If you have any doubts or needs about this, please come to our website http://www.sdzkjf.cn Ask!