1、进行清洗、加油、加润滑油脂等作业时的重要注意事项为防止在拌筒运转时，发生卷入拌筒驱动部件(拌筒、托轮、驱动轴)及其他运转部件的危险，当自动搅拌车发动机停止进行以下作业时，操作杆必须置于“停止”。并将发动机熄火。发动机钥匙拨出后，一定由操作者携带，以免发生人身事故。

1. The important precautions for cleaning, oiling, lubricating grease and other operations are to prevent the danger of being involved in the driving parts (mixing drum, supporting wheel, driving shaft) and other operating parts of the mixing drum during the operation of the mixing drum. When the automatic mixing truck engine stops the following operations, the operating lever must be placed at "stop". Shut down the engine. After the engine key is removed, it must be carried by the operator to avoid personal accident.

⑴对粘附在进料斗，拌筒筒口，拌筒托轮，后车架，拌筒刮桨板口的混凝土进行冲洗及铲除作业时。

(1) When washing and removing the concrete adhered to the feed hopper, mixing drum mouth, mixing drum supporting wheel, rear frame, and mixing drum scraper mouth.

⑵对拌筒、拌筒托轮、减速器、操作控制杆件、驱动轴等进行检修，以及加油、加润滑脂和换油时。

(2) The mixing drum, mixing drum supporting wheel, reducer, operating control rod, drive shaft, etc. shall be overhauled, and the oil shall be added, greased and changed.

⑶在平坦地带作业时，请将车轮制动闸完全锁定后再进行作业。

(3) When working in flat areas, please lock the wheel brake completely before operation.

2.进行自动搅拌车拌筒内混凝土等的铲除作业时的重要注意事项在拌筒内进行铲除等作业时，务请遵守以下事项。防止拌筒转动的操作顺序：

2. Important precautions during the removal of concrete in the mixing drum of the automatic mixer truck. Please observe the following items during the removal of concrete in the mixing drum. Operation sequence to prevent mixing drum from rotating:

①后部操作手柄确实置于空档位置。

① The rear joystick is indeed in the neutral position.

②停止发动机。

② Stop the engine.

③拔出发动机的钥匙，由操作人员携带保管。

③ The key of the engine shall be taken out and kept by the operator.

清除搅拌筒内外积污及残存的混凝土渣块时，以及在机修人员进入筒内进搅拌行自动上料搅拌车在工作时应注意什么检修和焊补作业时，需先关闭汽车发动机，使搅拌筒完全停止转动。

When removing the dirt and residual concrete slag inside and outside the mixing drum, and when the mechanical maintenance personnel enter the mixing line into the drum, the automatic loading mixer truck should pay attention to what maintenance and welding repair work should be done, the car engine should be turned off first to make the mixing drum completely stop rotating.

在机修人员进入筒内工作期间，要保证拌筒内通风良好，空气新鲜，无可然气体及有害灰尘，氧气供应充足。在筒内使用电动工具操作时，操作人员要有良好的绝缘保护。更多相关安全注意事项就来我们网站http://www.sdzkjf.cn咨询吧！

During the period when the machine maintenance personnel enter the mixing drum for work, ensure that the mixing drum is well ventilated, fresh air, free of natural gas and harmful dust, and sufficient oxygen supply. When using electric tools in the cylinder, the operator should have good insulation protection. For more safety precautions, please visit our website http://www.sdzkjf.cn Ask!