自动搅拌车主要应用于环境不是很好的施工地方，所以要求工作人员要正确使用该设备，如果使用不当会损坏设备，甚至于对自己产生隐患。那么工作人员应该如何规范自动上料自动搅拌车的操作呢？

　　Automatic mixing truck is mainly used in construction places where the environment is not very good, so it requires the staff to use the equipment correctly, if improper use will damage the equipment, or even have hidden dangers for themselves. So how should the staff regulate the operation of automatic feeding automatic mixing truck?

　　操作自动上料自动搅拌车前，注意在装料前排净搅拌筒内剩余的水和杂物。运输过程中要不停地转动，防止混凝土离析。混凝土搅拌车到达工地卸料前，应将搅拌筒以14-18转/分的速度全速转动1-2分钟，然后反向卸料。反转前应先停止搅拌筒，然后再开始反转。工作时，请勿将手伸入自动上料搅拌车的搅拌筒内，严禁将手伸入主卸料槽与加长卸料槽的连接部位进行搅拌，以免发生事故。

　　Before operation of automatic feeding and automatic mixing truck, pay attention to the remaining water and sundries in the mixing drum in the front row of loading. Keep turning during transportation to prevent concrete segregation. Before the concrete mixing truck arrives at the site for unloading, it should turn the mixing cylinder at the speed of 14-18 RPM for 1-2 minutes at full speed, and then reverse unloading. Stop stirring cylinder before reversing, and then start reversing. When working, do not put your hand into the mixing drum of the automatic feeding mixer truck. It is strictly forbidden to put your hand into the connecting part of the main discharging tank and the extended discharging tank to stir, so as to avoid accidents.

　　冬季施工应做到：开机前检查是否有结冰；下班时小心清除搅拌筒和供水系统中的残水，关闭水泵开关，将控制手柄置于“停止”位置。在工地卸货后，立即用设备附带的软管冲洗进料斗、卸料斗、卸料槽等，清除附着在车身上的污泥和混凝土。在返回搅拌站的途中，应向搅拌筒内注入150-200L的水，以清除筒壁和叶片粘结的混凝土残渣。

　　Winter construction should be done: check whether there is ice before starting; When off duty, carefully remove the residual water in the mixing cylinder and water supply system, turn off the pump switch, and put the control handle in the "stop" position. After unloading at the site, immediately flush the feed hopper, discharge hopper, discharge trough, etc. with the hose attached to the equipment to remove the sludge and concrete attached to the car body. On the way back to the mixing station, 150-200L of water should be injected into the mixing cylinder to remove concrete residue bonded to the cylinder wall and blade.

　　另外，自动搅拌车周围要用支架支撑，并且将自动搅拌车放在坚固的地方。自动搅拌车在使用前要先进行检查，确保设备控制器和各部件完好以后才可以正常运行。自动搅拌车的筒内不能存在异物，否则会影响到后面的搅拌效果。如果现场需要维修，需要将自动搅拌车的料斗固定好，断电以后才可以进行维护。如果要进入到搅拌筒内，外面则需要有人员看管。

　　In addition, stand around the agitator and place the agitator in a firm place. Automatic mixing truck should be checked before use to ensure that the equipment controller and all parts are in good condition before normal operation. There can be no foreign matter in the cylinder of the automatic mixing truck, otherwise it will affect the mixing effect behind. If the site needs maintenance, it is necessary to fix the hopper of the automatic mixing truck, and only after the power is off can the maintenance be carried out. If you want to enter the mixing cylinder, the outside should be supervised.

　　正确使用自动上料自动搅拌车，有利于施工的顺利进行，可以提高工程工作的效率，所以说工作人员操作自动搅拌车时要正确行事！更多内容的了解就来网站www.sdzkjf.cn看看吧！

　　The correct use of automatic feeding automatic agitator is conducive to the smooth progress of construction and can improve the efficiency of engineering work, so the staff should act correctly when operating automatic agitator! For more information, please visit www.sdzkjf.cn.