您好,欢迎光临莱州聚峰机械有限公司网站! 郑重声明 进入官网

自上料混凝土搅拌车轮边减速器的工作原理

来源:http://www.sdzkjf.cn/ 日期:2022-02-15 发布人:admin
自上料混凝土搅拌车在车轮边上有个减速器,是传动系中一级减速增扭装置,下面我们说说这个减速器的工作原理。
There is a reducer beside the wheel of the self loading concrete mixer, which is the last stage of deceleration and torque increasing device in the transmission system. Let's talk about the working principle of this reducer.
轮边减速器采用轮边减速器可满足在总传动比相同的条件下,使变速器、传动轴、主减速器、差速器、半轴等部件的载荷减少,尺寸变小以及使驱动桥获得较大的离地间隙等优点,它被广泛应用于载重货车、大型搅拌车、越野汽车及其他一些大型工矿用车。因此对轮边减速器的研究,具有很重要的实际意义和企业实用性。
Wheel side reducer adopts wheel side reducer, which can reduce the load and size of transmission, transmission shaft, main reducer, differential, half shaft and other components under the condition of the same total transmission ratio, and obtain large ground clearance for the drive axle. It is widely used in truck, large mixer, off-road vehicle and some other large industrial and mining vehicles. Therefore, the research on wheel reducer has very important practical significance and enterprise practicability.
自动搅拌车
目前采用的轮边减速器,就是为满足整个传动系统匹配的需要,而增加的一套降速增扭的齿轮传动装置。安装在搅拌车动力输出终端,减轻变速箱负载。采用轮边减速器是为了提高自上料混凝土搅拌车的驱动力,以满足或修正整个传动系统驱动力的匹配。
The wheel reducer currently used is a set of gear transmission device with speed reduction and torque increase added to meet the matching needs of the whole transmission system. It is installed at the power take-off terminal of the mixer truck to reduce the load of the gearbox. The wheel reducer is used to improve the driving force of the self feeding concrete mixer, so as to meet or correct the matching of the driving force of the whole transmission system.
发动机点火经离合器、变速器和分动器把动力传递到前、后桥的主减速器,再从主减速器的输出端传递到轮边减速器及车轮,以驱动自上料混凝土搅拌车行驶。在这一过程中,轮边减速器的工作原理就是把主减速器传递的转速和扭矩经过其降速增扭后,再传递到车轮,以便使车轮在地面附着力的反作用下,产生较大驱动力。
When the engine is ignited, the power is transmitted to the main reducer of the front and rear axle through the clutch, transmission and transfer case, and then transmitted from the output end of the main reducer to the wheel reducer and wheels to drive the self feeding concrete mixer. In this process, the working principle of the wheel reducer is to transfer the speed and torque transmitted by the main reducer to the wheel after its speed reduction and torque increase, so as to make the wheel produce greater driving force under the reaction of ground adhesion.
以上就是今天带给大家的知识自上料水泥搅拌车专注行业多年,为用户不断的提供有价值的内容,更多内容请继续关注我们:http://www.sdzkjf.cn
The above is the knowledge brought to you today. Since the feeding cement mixer has focused on the industry for many years, it has continuously provided users with valuable content. Please continue to pay attention to us for more content: http://www.sdzkjf.cn

上一篇:减少自上料搅拌输送一体机零件磨损的注意事项
下一篇:为什么水泥自动搅拌车冬季运输耗油高?