1. Maintain the rated load of the self feeding mixing conveyor

这种工程机械设备上的负载的性质和大小对设备零件的损失有重大影响。通常，机械零件的磨损会随着负载的增加而增加。设计了组件的负载在工作负载期间，该组件的磨损持续增加。

The nature and size of the load on the construction machinery have a significant impact on the loss of equipment parts. Generally, the wear of mechanical parts will increase with the increase of load. The load of the component is designed. During the working load, the wear of the component continues to increase.

2.及时清洁以减少机械杂质对设备的影响

2. Clean in time to reduce the impact of mechanical impurities on the equipment

机械杂质通常是指建筑机械在使用过程中产生的材料，例如灰尘，土壤，一些金属碎片和油脂污渍。当这些杂质到达机器的工作表面之间时，其危害会加剧。它不仅增加了摩擦，还增加了油耗。它还会破坏润滑油膜并损坏配合表面。

Mechanical impurities usually refer to materials produced during the use of construction machinery, such as dust, soil, some metal fragments and grease stains. When these impurities reach between the working surfaces of the machine, their harm will be exacerbated. It not only increases friction, but also increases fuel consumption. It also damages the lubricating oil film and the mating surface.

3.自上料搅拌输送一体机，防止卡车零件腐蚀

3. Self feeding, mixing and conveying integrated machine to prevent corrosion of truck parts

腐蚀作用在零件上，很难发现，容易被忽视，并且可能更具危害性。空气中的雨水和化学物质通过管道和机器零件中的缝隙进入机器，并腐蚀零件。对腐蚀零件的持续工作会加速机器磨损并增加机械故障。因此，管理人员和操作人员需要根据当前的当地天气和现场条件采取合理的施工安排，以地减少化学腐蚀对机械零件的危害。

Corrosion on parts is difficult to find, easy to ignore, and may be more harmful. Rainwater and chemicals in the air enter the machine through cracks in pipes and machine parts and corrode the parts. Continuous work on corroded parts will accelerate machine wear and increase mechanical failures. Therefore, managers and operators need to take reasonable construction arrangements according to the current local weather and site conditions to minimize the harm of chemical corrosion to mechanical parts.

4.保持自上料搅拌输送一体机的设备部件的适当温度

4. Keep the proper temperature of the equipment parts of the integrated feeding, mixing and conveying machine

在工作期间，每个组件的温度都有其自己的正常范围。如果温度过高或过低，都会影响零件的强度，因此有必要使用冷却剂和润滑剂控制某些零件的温度，以在适当的温度范围内运行。

During operation, the temperature of each component has its own normal range. If the temperature is too high or too low, it will affect the strength of parts. Therefore, it is necessary to use coolant and lubricant to control the temperature of some parts in order to operate within the appropriate temperature range.