您好,欢迎光临莱州聚峰机械有限公司网站! 郑重声明 进入官网

水泥搅拌车的这些事情能帮你省时省力!

来源:http://www.sdzkjf.cn/ 日期:2021-05-17 发布人:admin
水泥搅拌车在建筑行业是个经常碰面的小帮手,因为水泥搅拌车的工作效率和质量都很好,也帮我们节约了时间去做别的事情
Cement mixer is a small helper often met in the construction industry, because the work efficiency and quality of cement mixer are very good, and also help us save time to do other things
水泥搅拌车的主要结构有哪些:
What are the main structures of cement mixer truck
水泥搅拌车主要由汽车底盘、搅拌筒、传动系统、供水装置等部分组成。由于技术瓶颈,国产搅拌车的四大件液压马达、变量柱塞泵、减速机、冷却器全部为进口部件。
Cement mixing truck is mainly composed of chassis, mixing drum, transmission system, water supply device, etc. Due to the technical bottleneck, the hydraulic motor, variable piston pump, reducer and cooler of domestic mixer are all imported parts.
水泥搅拌车组成:二类底盘、传动系、液压系统、机架、搅拌罐、进出料装置、供水系统、操纵系、人梯等部分。搅拌罐前端与减速机联接安装在机架前台上,后端通过滚道由安装在机架后台的两个托轮支撑。
水泥自上料搅拌车
Cement mixer truck consists of class II chassis, transmission system, hydraulic system, frame, mixing tank, feeding and discharging device, water supply system, control system, ladder, etc. The front end of the mixing tank is connected with the reducer and installed on the front stage of the frame, and the rear end is supported by two supporting wheels installed on the back stage of the frame through the raceway.
我们都知道汽车的车架在轮胎上,并且轮胎与地面接触。 换句话说,要判断道路是否可以通过,主要取决于轮距是否在道路宽度内。 因此,我们也知道水泥搅拌机的环境适应性不仅受到发动机的影响,还受到轮距的影响。 那么我们自然就会知道,小型混凝土搅拌机的轮距的选择非常重要。
We all know that the frame of a car is on the tire and the tire is in contact with the ground. In other words, whether the road can pass depends on whether the track width is within the road width. Therefore, we also know that the environmental adaptability of cement mixer is not only affected by the engine, but also affected by the wheelbase. Then we will naturally know that the selection of the track of small concrete mixer is very important.
其次,轮距和车框架之间的匹配也非常重要。 因为上面我们说过,汽车的框架位于轮胎的顶部。 然后,合理的轮距框架必须在合理的轴承范围内。 如所谓的量身定制,用于汽车的衣服就是汽车的车架。 如果不合理地剪了衣服,那不仅对汽车不利。 这也是某些模型易于侧翻的原因-汽车的框架太大,轮距太小并且太高。 不言而喻。
Secondly, the matching between the track and the frame is also very important. Because as we said above, the frame of the car is at the top of the tire. Then, a reasonable track frame must be within a reasonable bearing range. Such as the so-called tailor-made, for the car's clothing is the car frame. If you cut clothes unreasonably, it's not only bad for cars. This is also the reason why some models are prone to rollover - the frame of the car is too large, the track is too small and the center of gravity is too high. It goes without saying.

上一篇:一辆搅拌车轻松解决混凝土离析
下一篇:搅拌机械液压系统容易出现哪些故障?