水泥自动搅拌车在使用过程中防抱死系统出现故障,从而影响搅拌车的正常工作.为了尽快解决故障,必须先找出故障的原因,一般出现原因的点在于下面这些:
In order to solve the problem as soon as possible, we must first find out the cause of the failure. Generally, the reasons are as follows:
一、检查水泥自动搅拌车的驻车制动是否完全释放。
1、 Check whether the parking brake of concrete mixer is released completely.
二、检查制动储液罐液面是否符合说明书的规定。
2、 Check whether the liquid level of the brake reservoir meets the requirements of the manual.
三、检查所有的制动管路有无损坏变形和泄漏迹象。
3、 Check all brake lines for damage, deformation and leakage.
四、检查防抱死系统的所有熔断丝是否完好,导线是否破损,插座是否牢固。
4、 Check whether all fuses of anti lock system are in good condition, whether the wires are damaged and whether the sockets are firm.
五、检查蓄电池容量和电压是否符合规定,正负极导线的连接是否可靠。
5、 Check whether the capacity and voltage of the battery meet the requirements, and whether the positive and negative wires are reliably connected.
六、检查防抱死系统、ECI_I插接器连接是否牢靠。
6、 Check anti lock system and ECI_ I. whether the connector is firmly connected.
七、检查电路连接处是否腐蚀、损坏、松脱或接触不良,ABS的各搭铁线搭铁是否可靠。
7、 Check whether the circuit connection is corroded, damaged, loose or in poor contact, and whether the grounding wires of ABS are reliable.
八、检查轮胎是否符合要求。
8、 Check whether the tire meets the requirements.
九、检查水泥自动搅拌车的车轮转动有无阻滞,轮毂轴承间隙是否正常。
9、 Check whether the wheel rotation of concrete mixer is blocked and whether the hub bearing clearance is normal.
This article is a wonderful content provided by Zhongke self feeding mixer for you today. For more wonderful content, please click to enter the website http://www.sdzkjf.cn To view, more wonderful content can click on the relevant page to view
上一篇:小型搅拌车残渣怎么进行处理?
下一篇:小型搅拌机使用禁忌,注意事项